Sam's been busy lowering this 1967 Devon
....we've also had a few blue buses in. These ones in for MOTs and general checks
Tuesday, 27 October 2009
Monday, 26 October 2009
Wednesday, 14 October 2009
SO42 update
OK, we've made a start.
First we tidied up the load area a little and got rid of this
from here
all the rot cut out from one side. The remaining chassis was in really good condition. We've taken it back to bare metal and then given it a good coat of special primer - we then go on to do the same on the other side but i'm sure youget the picture
that's it for now - plenty more to come on this one soon
First we tidied up the load area a little and got rid of this
from here
all the rot cut out from one side. The remaining chassis was in really good condition. We've taken it back to bare metal and then given it a good coat of special primer - we then go on to do the same on the other side but i'm sure youget the picture
next we sorted out a couple of bits on the rear corner
that's it for now - plenty more to come on this one soon
SO42 Project
Mike and Sue's Projects
We've just begun work on Mike and Sue's '62 after a long break. First jobs will be to sort out the rot in the side window apertures and re-seating the elevating roof (all the roof metal is new).
floors and side panels were replaced by 50-67 a couple of years ago
floors and side panels were replaced by 50-67 a couple of years ago
Wednesday, 7 October 2009
7 Oct 2009
Lots going on here at the moment. We still have a few major projects on the go but plenty of routine stuff as well.
Jeff has just about finished the brakes on Paul's ratty split. A new CSP master cylinder kit, discs, callipers and all new hard and soft lines have been fitted. Thanks to Retrodubs for all the parts.
Mike and Sue's bus is now being fitted up by Chris and Sam.
Jeff has just about finished the brakes on Paul's ratty split. A new CSP master cylinder kit, discs, callipers and all new hard and soft lines have been fitted. Thanks to Retrodubs for all the parts.
Mike and Sue's bus is now being fitted up by Chris and Sam.
Jem is burried under a load of rust under this split
Friday, 2 October 2009
Colin has been busy in the trim shop and has done a superb job on Mike and Sue's front seats
Colin is a Master Trimmer with over 20 years experience - the quality of his work is beyond anything we have been able to offer before ........ we've started stripping and cutting another big project. This t3 is pretty nailed and will be getting a huge amount of new metal.
Colin is a Master Trimmer with over 20 years experience - the quality of his work is beyond anything we have been able to offer before ........ we've started stripping and cutting another big project. This t3 is pretty nailed and will be getting a huge amount of new metal.
Subscribe to:
Posts (Atom)